Cisco UCS – CIMC did not detect storage controller error

During a recent UCS firmware upgrade I had quite a few blades show up with the error “CIMC did not detect storage”. Within UCSM I could see that the blade had a critical alert. It initially started after I upgraded UCS Manager firmware as documents in a previous post I wrote about UCS Firmware Upgrades. I did some searching around to find what may be causing the issue and the best answer I could find was to from the Cisco community forums to disassociate the blade, decommission and reseat within the chassis. I later spoke to a Cisco engineer and he advised of the same steps but that it was also possible to do without reseating the blade. This also looks like its a problem when upgrading from 2.2(1d) to other versions of UCSM but I haven’t been able to validate if it’s only that version or if it also affects others.

The full error I saw was for code F1004 and for Controller 1 on server 2/1 is inoperable. Reason: CIMC did not detect storage

cimc error

Within UCSM I could see there was an issue with the Blade

cimc error server blade

Before proceeding with the upgrade of the FIs, IOMs and Blades themselves I wanted to clear any alerts within UCSM, particularly critical alerts. The steps I followed to bring the blade back online were to go to the blade and select Server Maintenance
cimc server maintenance

Read More